LD Systems Stinger Sub 15 A G2 Active 15-Inch Powered Subwoofer
15" active PA Subwoofer
LD Systems Stinger Sub 15A G2 Active Subwoofer
The Stinger Sub 15A G2 active subwoofer is suitable for universal use with speakers made by LD Systems and other manufacturers.
The integral Class D power amplifier with a full 1600W of peak power, teamed with a 15" high-performance subwoofer, provides dynamic, high-impulse-fidelity bass response down to 35Hz and an enormous maximum sound pressure level of 124dB (133dB peak). The compact bass reflex cabinet is made of sturdy multiplex.
The comprehensive features include volume and low pass controls (80 to 200 Hz) as well as phase reverse for precise system integration. It comes with XLR/jack combo and XLR connectors. Passive subwoofers, for example, the Stinger Sub 15 G2, can be driven in parallel via a Speakon-compatible power amp output. Two filtered satellite outputs with a 100Hz cut make it possible to loop through the signal to powered full-range speakers. Of course, the Stinger Sub 15A G2 has extensive protective circuitry for safe continuous operation.
Additional features include an M20 stand mount and the innovative LD "Evolutive Handles". These ergonomic carrying handles permit a secure grip from all sides, thus simplifying transport. A transport bag and a dolly are available as accessories.
|Product type:||PA subwoofer|
|Low/mid driver dimensions:||15"|
|Low/mid driver dimensions (mm):||381mm|
|Woofer voice coil:||3"|
|Woofer voice coil (mm):||76.5mm|
|Frequency response:||35 - 200Hz|
|Max. SPL (continuous):||124dB|
|Max. SPL (peak):||133dB|
|Protection circuits:||limiter, DC, over-current, short circuit|
|Input impedance:||30 kOhm(s)|
|Input sensitivity:||0.3 (RMS)V|
|Controls:||Sub Freq (adjustable low-pass filter), sub level, Subwoofer Phase Reverse|
|Indicators:||Power, protect (protection circuit engaged)|
|Line input connectors:||6.3 mm Jack, XLR|
|Line outputs:||2 x sat output 100 Hz, 2 x direct output|
|Line output connectors:||XLR|
|Speaker output connections:||Speakon compatible|
|Minimum impedance of connected speakers:||8Ohm(s)|
|Operating voltage:||transformer, 220 V AC - 240 V AC|
|Cabinet material:||15 mm Plywood|
|Cabinet surface:||texture paint|
|Features:||threaded flange M20, LD Systems "Evolutive" handles|