QSC K8 Top Box Speaker

Regular Price: RRP $1,499

Special Price $1,125

Webcart Offer

QSC K8 Top Box Speaker

Seen a better Price? With our buying power, we most often beat other offers! You'd be crazy not to try us!
RRP is suggested only by the supplier and we may not have sold in the past, now or in the future at the RRP See terms & conditions.

QSC K8 Top Box Speaker

The QSC K8 features include:  

  • 8” Woofer; 1.75” diaphragm compression driver
  • 105° Nominal coverage angle
  • Maximum SPL 127 dB peak
  • 1000 watt continuous Class D power modules in all models
  • Onboard mixer with two combo XLR and ¼” inputs, and stereo RCA inputs, (three audio input sources); two direct channel outputs and single summed balanced output
  • Extensive DSP enhances system performance
    • DMT  (Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural "dead" or "hot" frequency zones.
    • Intrinsic Correction , first featured in our high-end line-array products maps 65-75 spatially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat band pass target. The result is a speaker that behaves equally well across the entire sound field.
    • DEEP  and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies.
    • GuardRail  protection protects both the amplifier module and your performance from unnatural and destructive clipping.
  • Attractive and professional appearance
  • Rugged ABS enclosures
  • 16 Gauge powder coated steel grille
  • Comfortable ergonomic handles
  • 35 mm pole sockets with Tilt-Direct
  • M10 rigging points
  • Eye-bold and Yoke Mount accessories available


    K Series   
    ConfigurationTrapezoidal 2-wayMultipurpose 2-wayMultipurpose 2-way

    8" cone transducer
    1.75" diaphragm compression driver

    10" cone transducer
    1.75" diaphragm compression driver

    12" cone transducer
    1.75" diaphragm compression driver
    Frequency Response (-6 dB)66 Hz - 18 kHz60 Hz - 18 kHz52 Hz - 18 kHz
    Frequency Range (-10 dB)61 Hz - 20 kHz56 Hz - 20 kHz48 Hz - 20 kHz
    Nominal Coverage (-6 dB)105° conical90° conical75° conical
    Maximum SPL1127 dB peak129 dB peak131 dB peak
    Power Output21000 W continuous Class D
    (500 W LF, 500 W HF) 
    2000 W peak
    1000 W continuous Class D
    (500 W LF, 500 W HF)
    2000 W peak
    1000 W continuous Class D
    (500 W LF, 500 W HF)
    2000 W peak
    Input Impedance (ohms)XLR / ¼": 40k balanced / 20k unbalanced
    XLR / ¼" MIC mode: 2260 balanced
    RCA: 10k
    ControlsPower, Gain A, Gain B, Mic/Line, LF Mode (Ext Sub/Norm/DEEP ), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit)
    IndicatorsPower, Signal A, Signal B, Standby, Limit, Mic
    ConnectorsBalanced female XLR/¼" line/mic level input, Balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector
    CoolingOn demand, 50 mm variable speed fan
    Amplifier ProtectionThermal limiting, output overcurrent, overtemperature muting, GuardRail
    Transducer ProtectionThermal limiting, excursion limiting
    AC Power InputUniversal power supply 100-240 VAC, 50 - 60 Hz
    AC Power Consumption
    (1/8 Power)
    100 VAC, 2.3 A
    120 VAC, 2.01 A
    230 VAC, 1.13 A
    MaterialImpact resistant ABS
    FinishBlack paint
    GrilleRugged Powder-Coated Steel Grille
    Dimensions (HWD)17.7" x 11" x 10.6"
    450 mm x 280 mm x 269 mm
    20.4" x 12.6" x 11.8"
    519 mm x 320 mm x 300 mm
    23.7" x 14" x 14"
    603 mm x 356 mm x 356 mm
    Weight (Net)27 lb / 12.2 kg32 lb / 14.5 kg41 lb / 18.6 kg
    Available AccessoriesK8 TOTE, K8 YOKE, M10 Kit-CK10 TOTE, K10 YOKE, M10 Kit-CK12 TOTE, K12 YOKE, M10 Kit-C

    Check out the full range of QSC at Derringers and remember that all prices, web or counter, are challenged by our helpful staff! QSC Audio Products, LLC is an American manufacturer of professional audio products. QSC's target markets are audio professionals in concert, installation, portable entertainment and cinema applications.


    Customer Reviews

    Review "QSC K8 Top Box Speaker"

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register

    Product Tags

    Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.