QSC KW122 Powered Speaker

Regular Price: RRP $2,599

Special Price $1,923

Webcart Offer

QSC KW122 Powered Speaker

QA KW122
Seen a better Price? With our buying power, we most often beat other offers! You'd be crazy not to try us!
RRP is suggested only by the supplier and we may not have sold in the past, now or in the future at the RRP See terms & conditions.
Description

QSC KW122 Powered Speaker

KW122 Features

  • 12” Woofer; 1.75” diaphragm compression driver
  • 75° Nominal coverage angle
  • Maximum SPL 131 dB peak
  • Also functions as monitor floor wedge
  • 1000 watt Class D power modules in all models (2 x 500 W continuous)
  • Onboard mixer with two combo XLR and ¼” inputs, and stereo RCA inputs, (three audio input sources); two direct channel outputs and single summed balanced output
  • Extensive DSP featuring DEEP and Intrinsic Correction enhances system performance
  • DMT (Directivity Matched Transition) ensures uniform coverage across the entire sound field
  • Rugged, texture-painted birch enclosures
  • Four-position Mic/Line gain (full-range models)
  • Tour-grade 16 gauge steel grilles
  • Comfortable ergonomic handles
  • 35 mm pole sockets with Tilt-Direct
  • M10 rigging points for suspended installation

 

KW Series Features

Inputs, Outputs and Mixing
Combo XLR and 1/4" TRS inputs accept both Mic and Line Level input while a set of RCA phono inputs (except KSub) allow additional connectivity to portable MP3 players, CD players and line-level mixers. Up to three audio sources can be mixed internally and summed to a balanced output for "daisy-chaining" of multiple units. Separate direct outputs are also provided on each channel for additional output flexibility. 


DEEP
Sophisticated digital signal processing provides greater low-frequency extension while precisely protecting the woofer from over-excursion. 

DMT
Directivity Matched Transition matches the HF coverage angle to the natural coverage angle of the woofer for uniform frequency response over the entire coverage area. 

Conical Wave Guide
The conical wave guide eliminates the phase distortions of typical asymmetric horns for more natural reproduction. 

1000 Watts
The same state of the art, light-weight Class D amplifier module powers all the K & KW Series models. 

EQ Modes
Optimize for a specific application with the simple flip of a switch. 

Energy Management
Automatic standby mode conserves energy and extends the life of the loudspeaker. 

LED Operation
Turn of the front panel power LED or switch it to show limiting operation. 

Remote Control
Easy to use remote gain control is ideal for installed applications. 

Pro Appearance
Sleek lines and a full grille for a more professional look than other molded loudspeakers. 

Locking IEC Power Cable
Help prevent unexpected interruptions. 

Connectivity
Mic/line and RCA inputs along with onboard mixing controls allow greater flexibility. 

Tilt-Direct Pole Mount
A simple turn of the dial is all it takes to alter the vertical directivity by 7.5 degrees. 

Suspension and Mounting
With integrated threaded inserts, KW Series is equally at home in mounted or flown applications. 

Threaded Pole
The KW181 subwoofer comes with a threaded pole for a snug, safe fit. 

Intrinsic Correction
An exclusive QSC process that applies extensive acoustic measurements to noticeably improve audio quality. 

Class D
Higher efficiency produces less heat and more sonic performance with lower overall current draw. 

Protections
QSC's Guardrail technology protect your loudspeakers from overexcursion. On-demand cooling fan and thermal limiting prevent overheated electronics. 

 

KW Series   
SPECIFICATIONSKW122KW152KW153
Configuration12" 2-way multipurpose15" 2-way trapezoidal15" 3-way trapezoidal
Transducers
  Low-frequency
  Mid-frequency 
  High-frequency

12" cone transducer

1.75" diaphragm compression driver

15" cone transducer

1.75" diaphragm compression driver

15" cone transducer
6.5" mid range cone transducer
1.75" diaphragm compression driver
Frequency Response (-6 dB)53 Hz - 18 kHz47 Hz - 18 kHz35 Hz - 18 kHz
Frequency Range (-10 dB)50 Hz - 20 kHz44 Hz - 20 kHz33 Hz - 20 kHz
Nominal Coverage (-6 dB)75° axisymmetric60° axisymmetric75° axisymmetric
Maximum SPL1131 dB peak133 dB peak134 dB peak
Amplifier
Power Output21000 W Class D (500 W LF, 500 W HF) continuous
2000 W peak
1000 W Class D (500 W LF, 500 W MF/HF) continuous
2000 W peak
Input Impedance (ohms)Channel A XLR / ¼":
Mic gain settingBalancedUnbalanced
0 dB38k19k
+12 dB10k5k
+24 dB2.66k1.33k
+36 dB660 ohms330 ohms
Channel B XLR / ¼": 38k balanced / 19k unbalanced
Channel B RCA: 10k
ControlsPower, Gain A, Gain B, Channel A Input Gain (0 dB / 12 dB / 24 dB / 36 dB), LF Mode (Ext Sub/Norm/DEEP ), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit)
IndicatorsPower, Signal A, Signal B, Standby, Limit, Mic (24 dB and 36 dB settings)
ConnectorsBalanced female XLR/¼" line/mic level input, Balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector
CoolingOn demand, 50 mm variable speed fan
Amplifier ProtectionThermal limiting, output overcurrent, overtemperature muting, GuardRail
Transducer ProtectionThermal limiting, excursion limiting
AC Power InputUniversal power supply 100-240 VAC, 50 - 60 Hz
AC Power Consumption
(1/8 Power)
100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A
Enclosure
Material15 mm painted birch plywood
FinishBlack textured paint
GrilleBlack powder coated 16 gauge steel
Dimensions (HWD)26" x 15" x 15.4"
660 mm x 381 mm x 391 mm
32.1" x 17.5" x 15.2"
816 mm x 445 mm x 386 mm
43.1" x 18.5" x 16.8"
1094 mm x 470 mm x 427 mm
Weight (Net)49 lb (22.2 kg)64 lb (29 kg)87 lb (39.5 kg)
Available AccessoriesKW SUS KIT 122, KW122 COVER, KW M10 KITKW152 COVER, KW M10 KITKW153 COVER, KW M10 KIT

 

Manufacture
QSC

Check out the full range of QSC at Derringers and remember that all prices, web or counter, are challenged by our helpful staff! QSC Audio Products, LLC is an American manufacturer of professional audio products. QSC's target markets are audio professionals in concert, installation, portable entertainment and cinema applications.

Reviews

Customer Reviews

Review "QSC KW122 Powered Speaker"

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Product Tags

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.